Super Clone Rolex Submariner 1:1 Replica Watches

Rolex Submariner Blue Dial 1:1 Super Clone Replica Watch | 18k Gold Bracelet | 3235 Swiss Clone Movement

Sumit Sharma — Fri, 30 May 2025 21:56:19 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126618LN
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 18k Gold Plated. 904L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Blue Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Blue Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – 5 layers real 18k yellow Gold plated bracelet. Base metal is 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner Blue Dial 1:1 Super Clone Replica Watch | 18k Gold Bracelet | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner NO-DATE 1:1 Super Clone Replica Watch | 3230 Swiss Clone Movement

Sumit Sharma — Thu, 29 Jul 2021 10:46:47 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3230 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	124060
MOVEMENT	– Exact 1:1 Rolex Calibre 3230 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3230’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Black Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Made with Solid 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner NO-DATE 1:1 Super Clone Replica Watch | 3230 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner HULK 1:1 Super Clone Replica Watch | 3135 Swiss Clone Movement

Sumit Sharma — Thu, 29 Jul 2021 10:42:12 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3135 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	116610LV
MOVEMENT	– Exact 1:1 Rolex Calibre 3135 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3135’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 40mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Hulk Green Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Green Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Made with Solid 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner HULK 1:1 Super Clone Replica Watch | 3135 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner Iced Out Super Clone Replica Watch | 3135 Swiss Clone Movement

Sumit Sharma — Wed, 26 Aug 2020 21:45:13 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3135 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	116610LN
MOVEMENT	– Exact 1:1 Rolex Calibre 3135 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3135’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 40mm Oyster Case – Moissanite Diamonds studded Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Moissanite Diamond studded Bezel
BRACELET	– Oyster design, flat three-piece links – Moissanite Diamond studded Bracelet. Base metal is 904L Grade Stainless Steel – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner Iced Out Super Clone Replica Watch | 3135 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner SMURF 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement

Sumit Sharma — Tue, 25 Aug 2020 19:11:56 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126619LB
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Blue Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Made with Solid 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner SMURF 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner BLUESY 1:1 Super Clone Replica Watch | 18k Two Tone Bracelet | 3235 Swiss Clone Movement

Sumit Sharma — Tue, 25 Aug 2020 19:06:26 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126613LB
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Blue Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Blue Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Two Tone Bracelet with 5 layers real 18k yellow Gold plating on middle links. Base metal is 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner BLUESY 1:1 Super Clone Replica Watch | 18k Two Tone Bracelet | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner Black Dial 1:1 Super Clone Replica Watch | 18k Two Tone Bracelet | 3235 Swiss Clone Movement

Sumit Sharma — Tue, 25 Aug 2020 19:00:37 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126613LN
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Black Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Two Tone Bracelet with 5 layers real 18k yellow Gold plating on middle links. Base metal is 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner Black Dial 1:1 Super Clone Replica Watch | 18k Two Tone Bracelet | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner STARBUCKS 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement

Sumit Sharma — Tue, 25 Aug 2020 18:42:13 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126610LV
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Green Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Made with Solid 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner STARBUCKS 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner DATE 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement

Sumit Sharma — Sat, 25 Jul 2020 01:03:04 +0000

Please Note: This is the Most Accurate Top Tier Rolex Submariner 1:1 Super Clone Replica Watch having an ‘Exact 1:1 3235 Swiss Clone Movement’. No Better Quality is made above than this in the World – Be Rest Assured. Thank You.
‘ALL PRODUCT PHOTOS ABOVE ARE REAL PHOTOS OF OUR WATCHES CLICKED BY US’
Reference No.	126610LN
MOVEMENT	– Exact 1:1 Rolex Calibre 3235 Swiss Clone Automatic Movement – Correct Serial Numbers and Identical ‘Rolex Geneve’ ‘3235’ etc, Gold Engraved Brand Markings on all small movement parts – Winding: Bidirectional Self-Winding via Perpetual Rotor – Oscillator: Anti Magnetic BLUE Parachrom Hairspring, exactly same as Original – Smooth Sweeping Seconds Hand Motion, 28.800 VPH (4Hz) – All Parts Are Interchangeable With The Original
FUNCTIONS	– 3 Big Center Hands: These are Hour, Minute & Seconds hands – Instantaneous Date with rapid setting – Stop-seconds for precise time setting
CASE	– 41mm Oyster Case – Solid 904L Stainless Steel Monobloc Construction. 904 L Grade of Steel is the same steel used by Rolex in their ‘Oystersteel’ stainless steel watches and it is rust proof – Screw-Down Case-Back & Winding Crown – ROLEX ROLEX Laser Engraving on Rehaut Ring with Perfect Alignment – Dimensions and Weight is Exact 1:1 Identical with Original
DIAL	– Black Dial – Hour Markers and Hands coated with Bright Superluminova Blue Luminescence Phosphorescent Lume that glows up to 4 to 6 hours at night – Exact 1:1 Correct Font Size and highly legible Chromalight display
BEZEL	– Scratch-Resistant, Unidirectional Rotatable 60-minute markings Graduated Black Bezel – Cerachrom insert in Ceramic with Platinized engraved markings
BRACELET	– Oyster design, flat three-piece links – Made with Solid 904L Grade Stainless Steel with DLC scratch-protection coating – Solid threaded screws, so you can easily remove bracelet links with just a small screwdriver – Folding OysterLock Safety Clasp with Rolex Glidelock extension system
CRYSTAL	– Scratch-Resistant Sapphire – Laser etched small Rolex Crown Logo at 6 o’clock
PRECISION	– (-3/+3 sec/day) – Within COSC certification limits
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Factory Sealed with O-Ring Rubber Gasket and Individually waterproof tested – Triplock one piece solid screw down crown with triple O-Ring synthetic silicone rubber sealant gaskets
WARRANTY	– All our 1:1 Rolex Superclone watches come with a Full 2 Years Warranty – Our Super clone Rolex Submariner watches are precisely engraved with correct serial numbers and they can be cross referenced

The post Rolex Submariner DATE 1:1 Super Clone Replica Watch | 3235 Swiss Clone Movement appeared first on 1:1 Super Clone Replica Watches.

Rolex Submariner Custom Dial Replica Watch | 18k Two Tone Bracelet | Swiss ETA Movement

Sumit Sharma — Sat, 25 Jul 2020 00:48:08 +0000

SPECIFICATIONS
CASE	– 41mm Solid 904L Stainless Steel Monobloc Construction – Screw-Down case-back & winding crown – ROLEX ROLEX Laser Engraving on Rehaut Ring – Dimensions and Weight 100% identical with genuine.
DIAL	– Marble Dial. Hour markers and hands coated with Bright Lume Superluminova Blue Luminescence Phosphorescent that glows up to 8 hours at night with uniform luminosity throughout – Correct Date Font & Size. Highly legible with laser precision text, prints and engravings , 100% same as genuine
BEZEL	– 120 clicks clockwise, Unidirectional Rotatable 60-minute graduated, Scratch-Resistant Black Ceramic
BRACELET	– Oyster design, flat three-piece links – 2-tone Solid 904L Stainless steel – Solid threaded screws – Folding OysterLock Safety Clasp with Easylink 5 mm Comfort Extension System
CRYSTAL	– Scratch-resistant sapphire, Cyclops lens over the date for 2.5x magnification power – Laser etched small Rolex Crown at 6 o’clock
MOVEMENT	– Authentic Swiss ETA 2836 Movement – Automatic, Smooth Sweeping Seconds Hand Motion
FUNCTIONS	– Center Hour, Minute & Seconds hands – Instantaneous date with rapid setting
PRECISION	– (-3/+3 sec/day)
POWER RESERVE	– Approximately 36 to 48 hours
WATER-RESISTANCE	– Individually waterproof tested to 100 meters / 330 feet
WARRANTY	– All our Rolex Swiss ETA Replica watches come with a Full 2 Years Warranty

The post Rolex Submariner Custom Dial Replica Watch | 18k Two Tone Bracelet | Swiss ETA Movement appeared first on 1:1 Super Clone Replica Watches.